सभी उत्पाद
  • HUATEC GROUP CORPORATION
    बीओबी
    Astm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw ​​2
  • HUATEC GROUP CORPORATION
    विलियम
    Astm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw ​​2
  • HUATEC GROUP CORPORATION
    टॉम
    Astm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw ​​2
  • HUATEC GROUP CORPORATION
    लियो
    Astm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw ​​2
व्यक्ति से संपर्क करें : Noah
फ़ोन नंबर : +8613911115555
व्हाट्सएप : +8613910983110

Digits 10Mm Surface Roughness Measurement Equipment Separate Probe Ra Rz Rq Rt

  • Digits 10Mm Surface Roughness Measurement Equipment Separate Probe Ra Rz Rq Rt
  • Digits 10Mm Surface Roughness Measurement Equipment Separate Probe Ra Rz Rq Rt
  • Digits 10Mm Surface Roughness Measurement Equipment Separate Probe Ra Rz Rq Rt
  • Digits 10Mm Surface Roughness Measurement Equipment Separate Probe Ra Rz Rq Rt
उत्पत्ति के प्लेस बीजिंग
ब्रांड नाम HUATEC
प्रमाणन ISO, CE, GOST
मॉडल संख्या एसआरटी6400
न्यूनतम आदेश मात्रा 1pcs
मूल्य 800-1000USD
पैकेजिंग विवरण मानक निर्यात पैकेज
प्रसव के समय 1-4 दिन
भुगतान शर्तें टी/टी, पेपैल, वेस्टर्न यूनियन
आपूर्ति की क्षमता प्रति माह 500 पीसी

निःशुल्क नमूने और कूपन के लिए मुझसे संपर्क करें।

व्हाट्सएप:0086 18588475571

वीचैट: 0086 18588475571

स्काइप: sales10@aixton.com

यदि आपको कोई चिंता है, तो हम 24 घंटे ऑनलाइन सहायता प्रदान करते हैं।

x
उत्पाद विवरण
सेंसर पृथक प्रेरण प्रकार पैरामीटर रा, आरजेड, आरक्यू, आरटी
सटीकता ≤±10% स्मृति 7 समूह
पीसी सॉफ्टवेयर संचार पोर्ट यूएसबी या RS232
प्रमुखता देना

surface roughness gauge

,

surface roughness meter
एक संदेश छोड़ें
उत्पाद विवरण

Digits 10 mm LCD Surface Roughness Tester SEPARATE PROBE Ra, Rz, Rq, Rt  test at any angle!

 

Key words:portable roughness tester, roughness ra, surface roughness, surface finish, roughness tester mitutoyo, roughness testing machine, surface finish tester, surface roughness tester manufacture, roughness testing machine manufacture

 

Features:
* Surface roughness tester SRT6400 is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.
* When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the separate probe.
* This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.
* The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt
* Highly sophisticated inductance sensor
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P
* Built-in lithium ion rechargeable battery and control circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C or USB interface.
*Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.
*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
*Metric /Imperial Conversion

 

Specifications:

Display: 4 digits, 10 mm LCD, with blue backlight
Parameters:  Ra, Rz, Rq, Rt
Measuring Range
           Ra, Rq:  0.005-16.00um/0.020-629.9uinch
           Rz,Rt:   0.020-160.0um/0.780-6299uinch
Accuracy: ≤±10%
Fluctuation of display value: Not more than 6%
Sensor :
         Test Principle: Highly sophisticated inductance type
         Radius of Probe Pin: 5um
         Material of Probe Pin: Diamond
         Dynamo-measurement of Probe: 4mN(0.4gf)
         Probe Angle: 90°
         Vertical Radius of Guiding Head: 48mm
Maximum driving stroke:  17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional
Evaluation length:  5l
Driving speed:
         sampling length = 0.25mm   Vt=0.135mm/s
         sampling length = 0.8mm    Vt=0.5mm/s
         sampling length = 2.5mm    Vt=1mm/s
         returning                  Vt=1mm/s
Profile digital filter
         Filtered Profile:            RC
         Filtered Profile:            PC-RC
         Filtered Profile:            Gauss
         Non-Filtered Profile:        D-P
Resolution :           0.001μm    if reading <10μm
                      0.01μm     if 10μm≤reading<100μm
                      0.1μm      if reading ≥100μm        
Evaluation length : 5 cut-off
Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~40°C
                   Humidity <80%

Standard Accessories:
   Carrying case.................1pcs
   Main unit......................1pcs
   Standard Sensor.............1pcs
   Standard Sample Plate...1pcs
   Power Adapter..............1pcs
   Operation Manual.........1pcs
   Screwdriver..................1pcs
   Adjustable Leg..............1pcs
   Sensor Protector...........1pcs

Optional Accessories:
1. Cable and Software for RS-232/USB
2. Extension Rod
3. Groove stylus
4. Curvature Probe
5. Measurement Stand
6. Bluetooth interface

 

टैग:

सतह खत्म परीक्षक

सतह की मोटाई मापनेवाला

surface roughness gauge

अनुशंसित उत्पाद