सभी उत्पाद
-
अल्ट्रासोनिक दोष डिटेक्टर
-
अल्ट्रासोनिक मोटाई गेज
-
कोटिंग मोटाई गेज
-
पोर्टेबल कठोरता परीक्षक
-
एक्स-रे दोष डिटेक्टर
-
एक्स-रे पाइपलाइन क्रॉलर
-
अवकाश डिटेक्टर
-
चुंबकीय कण परीक्षण
-
एड़ी धारा परीक्षण उपकरण
-
प्रवेशक परीक्षण
-
किनारे की गतिमानता
-
ब्रिनेल कठोरता परीक्षक
-
रॉकवेल कठोरता परीक्षक
-
माइक्रो विकर्स कठोरता परीक्षक
-
सामग्री कठोरता परीक्षक
-
कंपन मीटर
-
सतह रफ़्तार परीक्षक
-
प्रोफाइल प्रोजेक्टर
-
चमक मीटर
-
कंक्रीट परीक्षण हथौड़ा
-
लेजर इन्फ्रारेड थर्मामीटर
-
बीओबीAstm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw 2 -
विलियमAstm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw 2
-
टॉमAstm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw 2
-
लियोAstm E114-15 इंच टाइप 1018 कैलिब्रेशन टेस्ट ब्लॉक कार्बन स्टील मिनी Iiw 2
Large Capacity Metal Hardness Tester Metal Hardness Tester Leeb Hardness Tester RHL-40B
निःशुल्क नमूने और कूपन के लिए मुझसे संपर्क करें।
व्हाट्सएप:0086 18588475571
वीचैट: 0086 18588475571
स्काइप: sales10@aixton.com
यदि आपको कोई चिंता है, तो हम 24 घंटे ऑनलाइन सहायता प्रदान करते हैं।
xउत्पाद विवरण
| मापने की दिशा | 360 डिग्री | कठोरता का पैमाना | एचएल, एचबी, एचआरबी, एचआरसी, एचआरए, एचवी, एचएस |
|---|---|---|---|
| प्रदर्शन | खंड एलसीडी | डेटा मेमोरी | अधिकतम 100 समूह ((प्रभाव के समय के सापेक्ष 32°1) |
| कार्यरत वोल्टेज | 3V (2 AA आकार क्षारीय बैटरी) | निरंतर कार्य अवधि | लगभग 100 घंटे (बैकलाइट बंद होने पर) |
| प्रमुखता देना | hardness testing machine,metal hardness tester |
||
उत्पाद विवरण
Metal Hardness Tester Leeb Hardness Tester Portable Hardness Tester RHL-40B
Features:
- Compact plastic case,suitable for use under poor working conditions. Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL
- Large screen (segment LCD), showing all functions and parameters. With EL background light.
- Large capacity memory could store 100 groups information.
- Datapro Software to connect with PC via RS232 port. Micro printer support
- Software calibration function.
Technical Specifications:
- Measuring range:
(170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA,(13-100)HRB
- Measuring direction:360°(↓↖↗↘↙→←↑)
- Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
- Display:segment LCD
- Data memory:max. 100 groups(relative to impact times 32～1)
- Working voltage:3V(2 AA size alkaline battery)
- Continuous working period:about 100 hours(With backlight off)
- Communication interface:RS232
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy work piece
- The installed machinery and permanently assembled parts.
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for large-scale work piece
Configuration:
| No. | Item | Quantity | Remarks | |
| Standard Configuration | 1 | Main unit | 1 | |
| 2 | D type impact device | 1 | With cable | |
| 3 | Standard test block | 1 | ||
| 4 | Cleaning brush (I) | 1 | ||
| 5 | Small support ring | 1 | ||
| 6 | Alkaline battery | 2 | AA size | |
| 7 | Manual | 1 | ||
| 8 | Instrument package case | 1 | ||
| Optional Configuration | 9 | Cleaning brush (II) | 1 | For use with G type impact device |
| 10 | Other type of impact devices and support rings | Refer to Table 3 and Table 4 in the appendix. | ||
| 11 | DataPro software | 1 | ||
| 12 | Communication cable | 1 | ||
| 13 | Micro Printer | 1 | ||
| 14 | Print cable | 1 |
Testing range:
Other type of impact devices
| Material | Method | Impact device | |||||
| D/DC | D+15 | C | G | E | DL | ||
|
Steel and cast steel
|
HRC | 20～68.5 | 19.3～67.9 | 20.0～69.5 | 22.4～70.7 | 20.6～68.2 | |
| HRB | 38.4～99.6 | 47.7～99.9 | 37.0～99.9 | ||||
| HRA | 59.1～85.8 | 61.7～88.0 | |||||
| HB | 127～651 | 80～638 | 80～683 | 90～646 | 83～663 | 81～646 | |
| HV | 83～976 | 80～937 | 80～996 | 84～1042 | 80～950 | ||
| HS | 32.2～99.5 | 33.3～99.3 | 31.8～102.1 | 35.8～102.6 | 30.6～96.8 | ||
|
Cold work tool steel |
HRC | 20.4～67.1 | 19.8～68.2 | 20.7～68.2 | 22.6～70.2 | ||
| HV | 80～898 | 80～935 | 100～941 | 82～1009 | |||
|
Stainless steel
|
HRB | 46.5～101.7 | |||||
| HB | 85～655 | ||||||
| HV | 85～802 | ||||||
|
Grey cast iron
|
HRC | ||||||
| HB | 93～334 | 92～326 | |||||
| HV | |||||||
| Nodular cast iron | HRC | ||||||
| HB | 131～387 | 127～364 | |||||
| HV | |||||||
| Cast aluminium alloys | HB | 19～164 | 23～210 | 32～168 | |||
| HRB | 23.8～84.6 | 22.7～85.0 | 23.8～85.5 | ||||
|
BRASS(copper-zinc alloys)
|
HB | 40～173 | |||||
| HRB | 13.5～95.3 | ||||||
| BRONZE(copper-aluminium/tin alloys) | HB | 60～290 | |||||
| Wrought copper alloys | HB | 45～315 | |||||
| Available type of impact device | DC: Test hole or hollow cylindrical |
D+15: Test groove or reentrant surface |
C:Test small, light, thin parts and surface of hardened layer |
G: Test large, thick, heavy and rough surface steel |
E: Test super high hardness material | DL: Test slender narrow groove or hole |
Testing conditions:
| Type of impact device | DC(D)/DL | D+15 | C | G | E |
|
Impacting energy Mass of impact body |
11mJ 5.5g/7.2g |
11mJ 7.8g |
2.7mJ 3.0g |
90mJ 20.0g |
11mJ 5.5g |
|
Test tip hardness: Dia. Test tip: Material of test tip: |
1600HV 3mm Tungsten carbide |
1600HV 3mm Tungsten carbide |
1600HV 3mm Tungsten carbide |
1600HV 5mm Tungsten carbide |
5000HV 3mm synthetic diamond |
|
Impact device diameter: Impact device length: Impact device weight: |
20mm 86(147)/ 75mm 50g |
20mm 162mm 80g |
20mm 141mm 75g |
30mm 254mm 250g |
20mm 155mm 80g |
| Max. hardness of sample | 940HV | 940HV | 1000HV | 650HB | 1200HV |
| Mean roughness value of sample surface Ra: | 1.6μm | 1.6μm | 0.4μm | 6.3μm | 1.6μm |
|
Min. weight of sample: Measure directly Need support firmly Need coupling tightly |
>5kg 2～5kg 0.05～2kg |
>5kg 2～5kg 0.05～2kg |
>1.5kg 0.5～1.5kg 0.02～0.5kg |
>15kg 5～15kg 0.5～5kg |
>5kg 2～5kg 0.05～2kg |
|
Min. thickness of sample Coupling tightly Min. layer thickness for surface hardening |
5mm
≥0.8mm |
5mm
≥0.8mm |
1mm
≥0.2mm |
10mm
≥1.2mm |
5mm
≥0.8mm |
| Size of tip indentation | ||||||
| Hardness 300HV |
Indentation diameter Depth of indentation |
0.54mm
24μm |
0.54mm
24μm |
0.38mm
12μm |
1.03mm
53μm |
0.54mm
24μm |
| Hardness 600HV |
Indentation diameter Depth of indentation |
0.54mm
17μm |
0.54mm
17μm |
0.32mm
8μm |
0.90mm
41μm |
0.54mm
17μm |
| Hardness 800HV |
Indentation diameter Depth of indentation |
0.35mm
10μm |
0.35mm
10μm |
0.35mm
7μm |
--
-- |
0.35mm
10μm |
Support rings for Shaped Materials:
Other type of support rings
| No. | Type |
Sketch of non-conventional Supporting ring |
Remarks |
| 1 | Z10-15 | |
For testing cylindrical outside surface R10～R15 |
| 2 | Z14.5-30 | For testing cylindrical outside surface R14.5～R30 | |
| 3 | Z25-50 |
For testing cylindrical outside surface R25～R50 |
|
| 4 | HZ11-13 | |
For testing cylindrical inside surface R11～R13 |
| 5 | HZ12.5-17 |
For testing cylindrical inside surface R12.5～R17 |
|
| 6 | HZ16.5-30 |
For testing cylindrical inside surface R16.5～R30 |
|
|
7
|
K10-15 | |
For testing spherical outside surface SR10～SR15 |
| 8 | K14.5-30 | For testing spherical outside surface SR14.5～SR30 | |
| 9 | HK11-13 | |
For testing spherical inside surface SR11～SR13 |
| 10 | HK12.5-17 |
For testing spherical inside surface SR12.5～SR17 |
|
| 11 | HK16.5-30 |
For testing spherical inside surface SR16.5～SR30 |
|
|
12
|
UN | |
For testing cylindrical outside surface, radius adjustable R10～∞ |
अनुशंसित उत्पाद