अच्छी कीमत  ऑनलाइन

उत्पाद विवरण

घर > उत्पादों >
चुंबकीय कण परीक्षण
>
Asme-2007 Magnetic Flux Indicator Cx-430 GOST

Asme-2007 Magnetic Flux Indicator Cx-430 GOST

ब्रांड नाम: HUATEC
मॉडल नंबर: सीएक्स-430
MOQ: 10PCS
पैकेजिंग विवरण: मानक निर्यात पैकेज
भुगतान की शर्तें: टी/टी, पेपैल, वेस्टर्न यूनियन
विस्तृत जानकारी
उत्पत्ति के प्लेस:
बीजिंग
प्रमाणन:
ISO, CE, GOST
सामग्री:
DT4A विद्युत चुम्बकीय शुद्ध लोहे की प्लेट
रंग:
धातु की सतह चमकदार चांदी प्रस्तुत करती है, कोई जंग नहीं। कोई खरोंच नहीं, कोई जंग नहीं और इसी तरह
योजना:
परीक्षण के टुकड़े को नंगे बोर्ड पर रखें, समानांतर पूरी तरह से। कोई शिकन नहीं। कोई फट नहीं। सतह की खु
दोष गहराई:
30% शिम मोटाई, 0.004 "मोटी
प्रतीक का व्यास:
0.235 इंच
टेस्ट पीस cx4-230 की मोटाई:
0.004 इंच
नाली की गहराई:
0.0006 इंच
नाली की चौड़ाई:
0.006 इंच
प्रोडक्ट का नाम:
मात्रात्मक गुणवत्ता संकेतक
आपूर्ति की क्षमता:
प्रति माह 500pcs
प्रमुखता देना:

asme-2007 magnetic flux indicator

,

cx-430 magnetic flux indicator

उत्पाद का वर्णन

ASME-2007 Quantitative Quality Indicators Magnetic Flux Indicator QQI Test Shim CX-430

 

Overview

QQI's (Quantitative Quality Indicators) are magnetic particle test pieces with artificial defects used to verify proper field direction and adequate field strength. QQI's are a valuable tool to be used to establish testing criteria with Multi-Directional 2-D and 3-D type testers and to increase productivity by minimizing magnetizing shots.

QQI's are both thin and flexible to conform to the geometry of the test piece. They must be held in intimate contact with the test piece by either tape or glue.

 

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 0

 

Specifications

Inspection items The condition, method and demand of the test Inspection demand
Color Metal surface presents bright silver, no rust.no scratch, no corrosion and so on Passed muster
Planeness Put the test piece on bare board, parallel completely.no wrinkle.no burts.the surface’s roughness RA is 0.8um Passed muster
The size of sheet iron and cutting groove

The side length of test piece tested by milscale is 0.75in×0.75in.the average thickness of test piece CX-430 is 0.004in .The artificial defect symbol “o”and symbol“+”tested by precision microscope are both on the center of the test piece. The diameter of symbol four“o”is 0.507in,symbor“+”is 0.25in.

The thickness of test piece CX-430 is 0.004in.the groove depth is 0.0012in, the groove width is 0.007in.

 

Passed muster
Quality

The physics and chemistry test show the result that the metal is made from DT4A electromagnetic pure iron plate.

The analytic result of raw materials accords with the rule of GB6985,

Passed muster
   

 

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 1

Other Magnetic flaw  detectors test block:

 

MT  test block

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 2

Type N1: 45N, 5kgs

Type N2: 118N 12kgs

Type N3: 177N 18kgs

 

MT standard block

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 3

Katos rong type B: DC HRC=90~95, 12 drilling through holes diameter  0.07inch, center hole diameter 31.8mm

 

 

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 4

Type E: AC

 

Asme-2007 Magnetic Flux Indicator Cx-430 GOST 5

 MTU test blcok

रेटिंग और समीक्षा

समग्र रेटिंग

5.0
इस आपूर्तिकर्ता के लिए 50 समीक्षाओं पर आधारित

रेटिंग स्नैपशॉट

निम्नलिखित सभी रेटिंग का वितरण है
5 सितारे
100%
4 सितारे
0%
3 सितारे
0%
2 सितारे
0%
1 सितारे
0%

सभी समीक्षाएँ

1
12
Brazil Oct 29.2025
123
संबंधित उत्पाद
Handy Magna Yoke Kit  Magnetic Particle Testing For Surface Crack Testing वीडियो
सबसे अच्छी कीमत पाएं
Rotating Magnetic Field Probe Magnetic Flaw Detector वीडियो
सबसे अच्छी कीमत पाएं
Artificial Flaw Shims Ndt Magnetic Particle Testing Magnetic Particle Detector वीडियो
सबसे अच्छी कीमत पाएं
Electronic Magnetic Particle Testing Flaw Detection JB/T6065-04 ASME SE7709 वीडियो
सबसे अच्छी कीमत पाएं